Coating pump for smaller pipes

L'injection de résine est réalisée à l'aide d'une tige et de brosses (tailles disponibles du DN 32 au 300) sur des longueurs allant jusqu'à 40 m.

The resiine is injected through a hose attached to the shaft. Then a brush (sizes from DN 32 to 200) spreads the resin against the pipe wall.

The resin is applied in 2 or 3 layers of 0.5 to 1 mm in order to get a final thickness of 2.5 to 4 mm. The layers should be done every 2.5 to 4 hours (temperature of 16° to 20°).

The resin is dried to touch after 12 hours and finally hardened after 7 days. Service can be restored after 24 hours.

Depending on resin, the coating system is suitable for cast iron, PVC and concrete or clay pipes.

Light, compact and userfriendly, this coating system will completely change your habits of in house pipe rehabilitation.

We can also provide all the consumables :
- bi-component resin
- Supply hoses
- Brushes ...

Hot air blower

Resine injection Mini Pump

Resine injection Maxi Pump

Technical data
Ref Pump Mini Pump Maxi
Max. coating length 10m 40 m
Usage range DN 32 to 200 DN 70 to 300
Dimensions 42 x 25 x 52 cm 65 x 45 x 58 cm
Weight 16 Kg 22.5 Kg
Add this product to my wishlist Add this product to my wishlist Add this product to my wishlist